The process of charcoal extruder machine production line is mainly divided into five partss: raw materials preparation, crushing, mixing, forming and drying.
1. Preparation of raw materials. There are many raw materials for screw extruder production, and their quality is different. Therefore, in order to produce better briquette quality, many users or manufacturers choose to use a variety of different types of coal or charcoal to produce a variety of different types of charcoal rods to meet the different needs of customers.
2. Crush.In the previous procedure, it was mentioned that the specifications of raw materials for producing charcoal rods are different, so their sizes are also different. So in order to make the combustion effect of the finished products better, the particle size of the raw materials should be as small as possible, and it can be less that four millimeters.
3. Mix. To ensure the uniformity of raw materials is the basic requirement to ensure the quality of finished products. Therefore, after crushing the raw materials, it is necessary to mix the raw materials with a mixer, which has a great impact on the quality of finished products. In order to make the mixing effect and forming effect better, it is necessary to add appropriate amount of adhesives in the mixing process. When adding adhesives, attention should be paid to the type and concentration of adhesives to ensure that the adhesives can play the greatest role in the formation of materials.
4. Molding. The forming process is the most important in the whole process. E.P extruder has a high degree of automation, so it is not too difficult to operate.What users need to pay attention to is whether the machine will break down during operation and the forming prossure of the machine. In addition, it should be noted that users should pay attention to some basic machine inspection and maintenance methods.
5. Dry. Although the charcoal rods produced by the charcoal extruder briquette machine has been finished in regular shape, it can not be directly used or packaged because of the high moisture content in the finished products. In the drying process, with the evaporation of the finished products moisture, the hardness of the charcoal rods is increased gradually, which can become high quality charcoal fuel rods. In addition, customers can choose to purchase a dry or build a drying room to dry the finished products.
The above is the detailed charcoal extruder machine production process, the specific production situation should be carried out according to the customers’ own requirements. For any other questions, please consult E.P.
