Factors influencing the charcoal rods forming

When using the extruder machine to make charcoal rods, the forming effect of raw materials is very important, which directly determines the economic benefits of finished products and also reflects the quality of the machine. However, in the production process, there are still many customers who reflect that the forming effect of the machine can not reach the ideal effect. We should know that there many factors affecting the production of the extruder machine, including the improper handling of raw materials, crushing, mixing and other processes, etc. E.P believes that the main factors affecting the formation of charcoal rods are as follows.

The first is the size of the raw materials. In order to produce higher quality of more kinds of charcoal rods, many customers often mix other materials in the raw materials to make the size of materials different, so the raw materials should be crushed before forming. It is worth noting that the size of the raw materials is also to be mastered. If the size of raw materials is too small, it may lead to some materials can not be pressed in the production process, resulting in waste of materials, When the granularity of raw materials is too large, it is very likely to cause the machine blockage or damage the internal parts of the charcoal extruder, which has great harm to the machine service life.

Second, loosening of the screws in the key parts of the machine will also affect the forming effect. When the screws of some parts of the machine are loose, the overall pressure of the machine is reduced so that it can not meet the pressure required for materials forming, so this situation will also lead to materials can not be pressed.

Third, the amount of adhesives added is also important. When the binder is added too little, the molecular viscosity between the materials is too low to be formed. When the adhesives is added too much, it will lead to excessive viscosity between materials, and it will be difficult to press when the extruder is used for forming. Finally, it’s about the machine maintenance. No matter what kind of machinery, if it is not maintained after a long period of time, it will make the performance of the machine worse and worse. Therefore, when using the charcoalextrusion machine in daily production, operators should pay attention to the daily inspection and maintenance of the machine, which can improve the forming efficiency of the machine, reduce the maintenance cost of the machine and increase its service life.

Through analyzing the factors that may affect the forming effect of extruding press, we hope to be helpful to you. For more information about the extruder, please contact E.P.